Spacelog Apollo 11

Roger. Roger. That is affirmative, and we moved that switch to the OPEN position, and they went back to gray. Over.

Apollo 11, this is Houston. Over.

Roger, Houston. Apollo 11. Go ahead.

Roger. Could you give us comments on how the transposition and docking went? Over.

I thought it went pretty well, Houston, although I expect I used more gas than I've been using in the simulator. The turnaround maneuver—I went PITCH ACCEL COMMAND and started to pitch up, and then when I put MANUAL ATTITUDE PITCH back to RATE COMMAND for some reason it—it stopped its pitch rate, and I had to go back to ACCEL COMMAND and hit what I thought was an extra PROCEED on the DSKY. During the course of that, we drifted slightly further away from the S-IVB than I expected. I expected to be out about 66 feet. My guess would be I was around 100 or so; and therefore, I expect I used a bit more coming back in. But, except for using a little more gas—And I'd be interested in your numbers on that—everything went nominally.

Houston, Apollo 11. Over.

Go ahead, 11.

Roger. We're working on the pressurization of the LM now, and working off the decal with CSM-LM pressure equalization. And we're down to step 13, where we're waiting for the cabin pressure to be 5, or it should be roughly 5, before we turn the REPRESS package O₂ valve to FILL. Instead of 5, we're running about 4.4. Over.

Roger. Stand by a second.

And Houston, Apollo 11. We did put the REPRESS package O₂ valve to FILL momentarily there at step 13, and we have filled the bottles back up partially. What's the pressure reading in there, Neil?

We have about 450 psi now in the three 1-pound bottles.

Roger. Stand by a second, please.

Houston, Apollo 11. We think these readings are within normal tolerances. We just wanted to get your concurrence before we press down any further with these decals.

Okay, Captain.

Houston, Apollo 11. How do you read?

Apollo 11, this is Houston. Go ahead.

Roger. LM looks to be in pretty fine shape from about all we can see from here.

Okay. In reference to your question on this step 13 on the decal, I understand that you have used up the contents of the REPRESS O₂ package and at that time, instead of being up to 5 psi, you were reading 4.4. Is that correct?

Okay. 4.4. Yes sir.

Okay. And you want to know if you can go ahead and use additional oxygen to bring the command module up to 5.0 and continue the equalization? Over.

Yes. We think it's within normal tolerances, Bruce. We just wanted to get your concurrence before we press on with this procedure.

Roger, Apollo 11. Go ahead.

Okay. We're pressing on with the procedure.

And 11, Houston. We have a request for you. On the service module secondary propellant fuel pressurization valve: As a precautionary measure, we'd like you to momentarily cycle the four switches to the CLOSE position and then release. As you know, we have no TM or talkback on these valve positions, and it's conceivable that one of them might also have been moved into a different position by the shock of separation. Over.

Okay. Good idea. That's being done.

Houston. Roger. Out.

Apollo 11, Houston. We're doing a nonpropulsive vent on the booster at the present time. You may see some sort of a cloud coming out of it. When you're ready, I have your evasive maneuver PAD.

Roger, And it's coming out.